Services
Memory Mechanical Services

Intellex Trigger

Low Power Electronic Triggers are battery powered low power electronic firing heads used to initiate the detonation of ballistic devices with the highest degree of safety and control.

Features:

Complete Power Unit (CPU)

Complete Power Unit (CPU) is a unique electro- mechanical downhole setting tool, capable of delivering up to 90,000 lbs. of linear force which can be used to set, or un-set, plugs and packers and a wide range of tubing and casing sizes. CPU is conveyable via slickline, digital slickline, electric line, coiled tubing, drill pipe, work string or tubing.

Features:

likelihood of tool failure due to cumulative damage caused by continuous runs.

elements to properly conform and seal with the wellbore.

Complete Power Unit X-tended Stroke (CPU-XS)

Complete Power Unit Xtended Stroke (CPUXS) is a unique electro-mechanical downhole setting tool, capable of delivering up to 90,000 lbs. of linear force, which can be used to pull crown plugs of varying sizes. CPU-XS is conveyable via slickline, digital slickline, electric line, coiled tubing, drill pipe, work string or tubing.

Features:

Complete Power Punch

Complete Power Punch (CPP) is a hydraulic system that will provide the required forces needed to punch a punch button through the tubing/casing wall. CPP uses one or multiple floating pistons (Punch Pistons) to produce mechanical work.

Features

Pipe Recovery

Free Point Logging

Severing Tool

Split Shot

Split Shot® Cutter has been redesigned with the customer in mind and allows for easy electrical arming before loading the explosive segments. Split Shot® Cutters are designed for use where traditional jet cutters were not effective or could not be used. The Split Shot® Cutter’s linear configuration allows it to be positioned adjacent to the collar or connection and secured by inline magnets. After detonation, the collar or connection is split allowing the pipe to be freed for easy removal.

Magna Range Bridge Plugs

Magna-Range Bridge Plugs are designed to travel through tubing ID restriction(s) and set in a larger ID tubular below.

Cast Iron Bridge Plugs

Magna-Range Bridge Plugs are designed to travel through tubing ID restriction(s) and set in a larger ID tubular below.

Retrievable Bridge Plugs

Below you will find the different types of retrievable bridge plugs carried by Complete Wireline Solutions. See more on our Cased Hole Mechanical Services.

Types of RBPs

Thru-Tubing Spiral Bridge Plugs

TTS’ Spiral Thru-tubing Bridge Plug* is designed to run through a smaller pipe size or tubing restriction and set in larger ID casing below. The main application is for zonal isolation or abandonment as a base for a cement plug. Other possible uses include; depth control marker for subsequent gravel pack, whipstock, or perforating operations. Deployment of this patented plug system is possible using wireline or coiled tubing.

Vented & Non-Vented Thru-Tubing Peddle Baskets

Thru Tubing Umbrella Plug designed to pass through small restrictions and set in a larger ID tubular below. The ACE Thru Tubing Umbrella Plug firmly anchors into place a “metal petal” umbrella that functions as a cement basket to be utilized as a base for subsequent placement (dumping) of bridging material, cement, or resin. The unique setting mechanism positively deploys the bottom slips 12” below the end of the running sleeve.

Packers

Contact CWS to find out all the different packers CWS has to offer.

Inflatable Packers & Plugs

Below you will find the different types of inflatable packers & plugs carried by Complete Wireline Solutions. See more on our Cased Hole Mechanical Services.

Junk Basket/Gauge Ring

A wireline junk basket combined with a gauge ring performs two tasks in a quick single run. As the junk basket runs in the well, debris is collected from the bottom opening and trapped inside the tool. The gauge ring helps to scrape off any debris (such as cement or scale) on casing or tubing walls ensuring a clear, clean path is maintained. When the tool is moving back up, the basket is sealed against the rod trapping debris. The gauge ring size is always selected to be slightly larger than the outer diameter of any equipment subsequently run in hole.

Features

Straddle Packers

A straddle packer system can be installed via wireline, coiled tubing, or jointed pipe. When pressure control is required and/or lubricator height limits running length, modular latching seal extensions can be run in segments to achieve a straddle over a longer interval. This system can be used to patch holes in tubing, isolate zones, provide gas lift or jet pump installation.

Tubing & Casing Patches

Tubing Patch

Casing Patch

Thru-Tubing Gravel Packs

Contact CWS for additional information.

Cement Bailer

Download the spreadsheet for calculating the Cement Plug Length needed for long-term pressure isolation.

Select or modify the cells highlighted in yellow.

Positive Displacement Bailer

Electronic Bailer Bottom (non-explosive)

Flex Bailer Neo Flex Bailer

Sand, Cement, Plastic & Acid

Download the specifications and brochures for the various types of slurry offered by Compelte Wireline Solutions.

Specifications

Cement

Download the appropriate specification sheets for each cement slurry below.

Sand

Plastic

Acid

Contact Us

24 Hour On-Call Wireline Services

We are your COMPLETE Wireline provider!

Corporate Office

14090 W. Main St
Cut Off, LA 70345
(985) 693-6872

Louisiana Office

201 LA96
Broussard, LA 70518
(337) 364-0663

STX Operations

108 County Rd 211
Alice, TX 78332
(361) 661-1104

Hempstead Location

24097 Hwy6
Hempstead TX 77445